Aluminium Loading Ramps from Rampco. Rampco's aluminium loading ramps

Routine maintenance service of grass cutting plates, replacement of filters, fluids, with possibility of accessing the bottom of the machine. Made entirely of aluminium, with "clean pass" self-cleaning surface.

Weight: approximately 67 kilos

Three different heights: 80 cm - 100 cm and 110 cm.

Maximum loading capacity: 1,500 kg

Details:

Maintenance and service station for gardening machinery made entirely of aluminium where the operator can carry out routine and extraordinary maintenance jobs on the machine while working at a natural height or when working under the machinery to clean the grass cutting plate, to replace filters, to change oil and so forth.

Impressive advantages:

lightweight
rustproof
easy to transport
can be completely dismantled
has a "clean pass" tyre loading surface so that fluids, leftover grass, leaves and mud do not clog-up the surface.

It has 2 ramps at the side, which once removed, allow the operator to leave the machine raised on 4 supporting columns so that he can get under the machine to carry out whatever maintenance work needs to be done. The ramps at the sides are removed quite easily since they are connected to the load-bearing structure with a double hook connection.

The machine is loaded on the structure using traditional loading ramps.Load Service does indeed have 2 fixture pins that are used to secure the ramps. The service station can be equipped with steps at the side so that the operator can get down safely from the machine and the structure.

Single Walk Ramp

Single ramp for getting on and off vehicles, with operators on foot.

Details:

To guarantee operator safety and to make it easier to push loads up and down or to carry loads up and down on trolleys, C.L.M. produces a series of single ramps measuring 60 cm and 80 cm in width, in compliance with current safety standards. They are available with two different surfaces based on the wheels of the trolleys.

This series of single ramps is suitable for gardeners and for garden centres, for loading or unloading gardening/farming machinery, plant or earth carrying trolleys, toolboxes for electronic equipment/instrument carriers for setting up stages/concerts etc.

Ramps for kerbs

Ramps for getting machines up and down kerbs, walls and flower beds.

Details:

This 'kerb Ramp' range is dedicated to gardening machinery, among which are the ramps for kerbs that make it easy to climb up and down kerbs, steps, small walls and flower beds without damaging the grass cutting plate or the wheel axles.

Thanks to their lightness and compactness, they are very easily used and transported. Their length ranges from a minimum of 85 cm to a maximum of 150 cm and they are strong enough even to take heavier vehicles, such as tractors, cars etc.